Wyze cameras are popular among home security devices that provide home monitoring security via a smartphone or other mobile device. For other electronic devices, Wyze cameras require the occasional power cycle to reset stages and status. How to Power Cycle Wyze Camera is a question but it is easy to cycle Wyze Camera. Helps to resolve connectivity problems or various issues.

Power cycle Likewise called a hard reset, power cycling is the procedure of turning off an electronic appliance and waiting for a period of time, and then turning it on again. This process clears the device’s memory and resets settings that cause implementation problems. In this article, we cover in detail how to power cycle the Wyze Camera, including troubleshooting tips and practices for performing a reset.

Table of Contents

Use Power Cycle:

If the Wyze camera has connectivity problems, power cycling resets the camera and sets a new connection to the WiFi channel. This process can improve the camera’s streaming quality and also helps reduce buffering.

If the camera freezes or crashes when it encounters these problems, power cycling serves to clear the camera’s memory or reset the problematic settings. Might also come in handy in improving the general performance of the camera.

This problem can also be caused by the old firmware of the camera, so it is necessary to update the camera. This requires power cycling so you need to check that the camera is running the most delinquent software version.

Power cycling resets the camera if there is a power outage or surge in the home to ensure it continues to function properly. The Wyze Camera is battery-powered, so power cycling helps preserve and save battery life by resetting any settings that may exist exhausting the battery.

To Power Cycle Wyze Camera-

To turn off the camera, unplug the power cord or USB wire connected to the camera from the control board. If the camera is battery-operated, the battery needs to be removed instead.
Wait a moment for the camera’s memory and settings to clear.
The power board needs to be reconnected to the camera.
It is battery-operated so batteries will require to be reinserted.
Wait until the camera reboots, this may take a few minutes.
To test that the camera is working, connected, and streaming video, open the Wyze app on your phone or iPhone.

Reconnect Wyze Camera:

Wyze Camera disconnects or if it loses connection to the WiFi network, the camera needs to be reconnected to resume home monitoring. It has to be seen that the WiFi frequency band is set to 2.4 GHz. Many Wi-Fi modems are dual-band, providing the 2.4 GHz and 5 GHz bands.

Wyze Camera resolves not to work on WiFi access issues that have a landing page or sign-in portal. When operating an enterprise reference with a WiFi access point, the camera has to try to obtain a different WiFi transmission channel. Different appliances in the house connect to the WiFi network, try resetting your router or modem if necessary.

The Wyze Camera needs to be power cycled to establish a new connection with the WiFi network. When the camera reboots, it is important to note that a new connection to the WiFi network has been made.

If the camera doesn’t connect, use the Wyze app on a smartphone gadget. To add a camera through the Wyze app, click on the “Devices” icon and select the “+” option in the top right intersection of the screen. The camera model has to be selected from the list of available devices.

To connect the camera to the WiFi network, the name and password of the WiFi network will have to be entered and all the necessary information will have to be entered in it. After the setup method is complete, check the live stream in the Wyze app to see if the Wyze camera is working correctly.

Power Cycle Wyze Camera V2/V3:

Turn off the wyze camera For that, connect the camera control adapter or USB cord to the camera and unplug it from the control board. If the camera is battery-operated, the battery must be removed. Wait a while for the camera’s memory and settings to be cleared. The power board needs to be reconnected to the camera.

It is battery-operated so batteries will require to be reinserted. Wait until the camera reboots, this may take a few minutes. To test that the camera is operating, connected, and streaming video, open the Wyze app on your iPhone.

Enable Wyze Camera Remotely:

Remotely power cycling a Wyze camera is a useful solution when you don’t have physical access to the camera or are away from home.

To remotely cycle the camera-

Open the Wyze app on the smartphone and guide to the camera that is to be power cycled remotely.
Then select the “Settings” option in the top-right intersection of the screen.
Then scroll and click on “Advanced Settings”.
Next, select the “Restart device” icon and verify that you want to restart the camera. Wyze will remotely turn off the camera.
Wait a moment for the camera’s memory and settings to clear.
Then select the “Settings” option in the top-right intersection of the screen.
Then scroll and click on “Advanced Settings”.
Next, select the “Restart device” icon and verify that you want to renew the camera. Wyze will remotely turn on the camera.
To test that the camera is working, connected, and streaming video, open the Wyze app on your iPhone.

Cycle to Wyse Base Station:

First, the power adapter has to exist disconnected from the control board.
Wait a moment for the camera’s memory and settings to clear.
The power board needs to be reconnected to the Wyze Base Station.
Stay for a while for the connected base station to reboot.
Check that the Wyze device is connected and working correctly.

Factory Reset Wyze Camera:

The reset process erases all settings and configuration of the camera, so any important settings or data should be saved before proceeding.

To factory reset Wyze Camera-

Press and hold the Power button for a few seconds to press the reset button with a paperclip or sharp object.
The LED standing light on the camera will turn a stable yellow to indicate the camera has reset.
Then the power button has to be released and the LED light blinks blue which means the camera is rebooting.
Wait for a while until the camera reboots.
After the reboot method is finished your Wyze Camera will be factory reset and restored to its initial settings.
Finally, set the camera using the schooling in the Wyze app.

Disconnect Wyze Camera:

Wyze Camera disconnects or if it loses connection to the WiFi network, the camera needs to be reconnected to resume home monitoring. If the Wyze Camera does not receive a Wi-Fi signal, it is most likely due to interference from other nearby appliances or physical obstacles. So keep the camera near the router. If the camera is also far from the modem, it may not be able to connect to the WiFi network correctly.

You can also check the wifi signal using the wifi analyzer app. If the signal is invalid, move the modem closer to the camera or use a WiFi extender. Try taking the router out of the power board and plugging it in again. A firmware update is also necessary to fix this.

Blocked Wifi Signal:

If the Wyze Camera does not receive a Wi-Fi signal, it is most likely due to interference from other nearby appliances or physical obstacles. In view of this, the camera has to be moved to another place, this improves the WiFi signal strength. Remove obstacles between the camera and the router as they may block the Wi-Fi signal. Operating a Wi-Fi extender to increase signal strength.

Update Wyze Camera:

To update Wyze Camera –

First, open the Wyze app and click on the “Device Information” icon.
Click on the camera to be updated to go to “Device Information”.
Find the firmware update in “Device information”. When a new firmware update is available, a prompt will appear that says, “New firmware version available.” Click Update to start the firmware update method.
This may take some time relying on the camera model and internet link. The camera reboots or turns off during the update process. Therefore do not unplug or turn off the camera while the update is in improvement.
After the update process is complete, check the live stream in the Wyze app to see if the Wyze camera is working properly.

Connect Wyze Camera to New Wifi Network:

To connect Wyze Camera to a new WiFi network-

Open the Wyze app and select Home.
Click the + in the head left, then choose Add device and select Cameras.
Click on the device version that is your camera.
Observe the on-screen prompts to reset the camera.

conclusion:

Power cycle Also called a hard reset, power cycling is the method of turning off an electronic device and waiting for a period of time, and then turning it on again. This process clears the device’s memory and resets settings that cause performance problems. In this article, we detailed how to cycle the Wyze camera, including troubleshooting tips and exercises for resetting.